Nesis III User’s Manual
12.5
Autopilot Setup
12.5
Autopilot Setup
For autopilot installation and setup please check separate document:
Au-
topilot Installation Manual
. In this section only autopilot operations are de-
scribed.
12.6
Setting User Button
User button shall be configured to provide a quick access to autopilot func-
tions. It is advised to configure buttons as:
•
Short Press
set to the
Autopilot Menu
function,
•
Long press
set to the
Autopilot Disable
function.
Please check section 8.3.1 on page 86 for more details.
12.7
Safety
Autopilot system is not terrain aware and it will not make any avoidance
action or issue any terrain warning!
Please refer to the Autopilot Installation Manual for more details about the
safery measures.
12.8
Operation
Short press on the
User
button shows the autopilot menu, Figure 87. All
autopilot actions are accessed trough this menu.
The description of the actions is presented below. Some actions enable only
pitch and some only roll autopilot servo. The level action is the only one,
which enables both autopilot servos simultaneously.
Autopilot menu remembers last selection. When the menu is opened, last
action is already selected. This saves time when you change one parameter
often.
119
©
Kanardia
2018-2022
