Aetos User’s Manual
6.14
Service
SD disk
tells free space on the internal SD card, where map files are stored.
Service pass
holds a numeric password, which is needed to access the
Ser-
vice Options
section.
GNSS details
opens a window with GNSS satellite positions and status. The
following status are shown:
Error
is shown if there is no GNSS reception or some internal
error is detected.
2D fix
is shown when a position is known, but precision is limited.
3D fix
is shown when a position is known and enough satellites
are visible for a good fix.
3D+SBAS
is shown when a position is also augmented with SBAS
system – highest precision.
Counters
section lists three internal counters:
Engine total time – total time of engine running.
Flight total time – total time of aircraft being airborne.
Power-on total time – total time of Aetos being powered on.
CAN devices
section lists all devices detected on the CAN bus.
6.14
Service
The
Service
icon is entry point to protected
Service Options
section. It re-
quires a special password. This password is unique for each Aetos. It can be
found under
Service pass
item on the info window. See section 6.13.
Additionally, this password is also written on the warranty card, that comes
with each Aetos.
Service option icons are explained in separate section 7 starting on page 58.
7
Service Options
Most of
Service options
are covered in depth by other manuals, particularly
in the
Aetos Installation Manual
. Here, only a brief information will be pre-
sented. Figure 42 shows the service options screen. Note that slave Aetos has
only a subset of these icons.
58
©
Kanardia
2020