Aetos User’s Manual
6.6
Brightness
Figure 36:
An example of alarm editor for the high engine RPM situation.
Voice file
Select the voice file to be played when alarm is on. Voice will be
played only if
Voice
option is selected for mode.
Test voice
plays selected voice file. This is used to check if the selected file
is the correct one.
Activity
defines condition when an alarm is active.
Always
means that the alarm is always active.
With engine
means that the alarm is active only when engine is
running.
6.6
Brightness
The brightness icon is used to change the display brightness in range Aetos
always starts with maximal 100% brightness. When Aetos detects that it
runs on a backup battery (when such option is installed) it will automati-
cally reduce brightness to 80% unless lower brightness was already selected.
Brightness is selected in 10% steps.
6.7
Audio
The
Audio
icon is used to change the audio level output for Aetos warnings.
Figure 37 illustrates an example. The
Test
option is used to play a test file
and the
Volume
sets the volume level in 10% steps.
52
©
Kanardia
2020
