Aetos User’s Manual
4.5
Route
Figure 14:
List of possible actions on the Route selection.
Select the
New
option from Figure 13 left.
Aetos asks you for the departing (takeoff) airfield. Search for LJCL and
select it.
Next, Aetos asks for arrival (landing) airfield. Search for LHFM and
select it.
A window shown on Figure 15 left appears. The window shows both
airfields and an item labeled as
New
in-between.
Select the
New
item to add MW1, MUREG and SASAL waypoints in
sequence. All these are VFR waypoints, so select
VFR
or
All
when
asked for a waypoint type.
The final situation is shown on Figure 15 right. The item labeled as
New
will be removed from the final route automatically.
Close windows. Note that a new route is not activated automatically.
It must be activated manually.
Notice the
Summary
item. The total distance, estimated time needed for the
route and estimated fuel consumption are shown. The time estimate is based
on the typical aircraft cruising speed. See section 6.3.3 on page 44.
Note, this is a rough estimate. No extra climb time, descend time and traffic
pattern times are added.
The same is true for fuel consumption estimate – no extra fuel for climb or
any reserves are taken into account. It is based on the typical consumption.
See section 6.3.3 in page 44 for more details.
30
©
Kanardia
2020
