background image

20

411d

Reading

Tel: +44 (0)118 9311188 | Email: [email protected]

Aberdeen

Tel: +44 (0)1224 725999 | Email: [email protected]

Registered Address

ABLE Instruments & Controls Ltd
Cutbush Park, Danehill, Lower Earley, 
Reading, Berkshire, RG6 4UT. UK.

Web

able.co.uk

E-commerce

247able.com

20

Kamstrup A/S • 55121739_A3_GB_04.2016

MULTICAL® 403

9.7  M-Bus + pulse outputs, type HC-003-21

M-Bus module with primary, secondary and 
enhanced secondary addressing.
The module is connected to an M-Bus master 
via terminals 24 and 25 using a twisted pair. 
The polarity is without importance for the 
functionality.
The module is powered by the connected 
master.

9.8  Wireless M-Bus + pulse inputs, type HC-003-30*

The wireless M-Bus module has been designed 
to form part of Kamstrup’s hand-held Wireless 
M-Bus Reader system, which operates within 
the unlicensed frequency band in the 868 MHz 
area. The radio module is available with either 
internal or external antenna. Please note that 
both antenna types use the same connection.

The wireless M-Bus module must be connected to an internal or external antenna. When 

mounting an external antenna ensure that the antenna cable is not jammed or damaged when 
the calculator is assembled. Before mounting or replacing modules the power supply to the 
meter must be switched off. The same applies to mounting of an antenna.

Summary of Contents for MULTICAL 403
























Reviews: