manualshive.com logo in svg

Kamstrup M-Bus Master MultiPort 250D, Installation And User Manual

Share
Download
Kamstrup M-Bus Master MultiPort 250D Installation And User Manual Download Page 7

7

Kamstrup A/S • 5512853_C1_GB_01.2017

M-Bus Master MultiPort 250D

2.1  Overview of functions

•  Usable as master, repeater and level converter
•  Backlit 128 x 64 pixels LCD
•  Reading via display of both Kamstrup meters and third-party brands
•  Supports primary, secondary and enhanced secondary addressing
•  Collision detection with break signal
•  Up to 250 slaves per master
•  Integrated repeater function
•  Up to four repeaters in a system = a total of 1250 meters
•  Up to 14 km cable length 
•  300, 2400, and 9600 baud communication speed
•  Byte recovery 
•  Echo suppression
•  Transient protection
•  Integrated USB, RS-232, RS-485 and optical eye with automatic port controller
•  Module area for e.g. GSM/GPRS module
•  All ports are transparent and galvanically separated from the M-Bus network
•  Integrated web server for remote configuration, analysis and reading
•  PIN code protection of keyboard and optical eye
•  Event loggers for M-Bus master and M-Bus network
•  Cable connection via 9 PG cable glands
•  Local and remote update of firmware for future functionality
•  Up to IP 67 protection class.

Summary of Contents for M-Bus Master MultiPort 250D

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands