26
Kamstrup A/S • 55122714_A2_GB_04_2021
flowIQ® Gateway
7.1.1.3
Overview of the "SETUP loop" index
Some items in "SETUP loop" are displayed as “OFF”. This means that the function is not
available in the gateway.
"SETUP loop" menus
Index number in display
1.0
Customer number (No. 1)
3-001
2.0
Customer number (No. 2)
3-002
3.0
Date
3-003
4.0
Time*
3-004
5.0
Yearly target date 1 (MM.DD)
3-005
6.0
Monthly target date 1 (DD)
3-006
9.0
M-Bus primary address internal (No. 34)
3-009
10.0
Primary address module slot 1 (No. 34)
3-010
11.0
Primary address module slot 2 (No. 34)
3-011
14.0
t offset
3-014
15.0
Radio “ON” or “OFF”
3-015
16.0
Input A1 (preset register)
3-016
17.0
Input B1 (preset register)
3-017
18.0
Meter number of input A1
3-018
19.0
Meter number of input B1
3-019
24.0
EndSetup
3-024
* The clock can, under installation seal, be adjusted by all modules.
7.1.1.4
"TECH loop"
"TECH loop" includes a number of module readings which depend on the mounted module. These
readings are described in the respective technical descriptions for the modules. Simple modules,
however, only include the primary reading “Type/Config no.” (index number 2-101-00). If the meter
is not fitted with a module, “Type/Config no.” is displayed as “00000000”.
For an overview of "TECH loop", please refer to the technical description of MULTICAL® 603. Information
regarding registers not present in the gateway user loop are not relevant for flowIQ® Gateway.
