Kampmann Venkon 61, Assembly, Installation And Operating Instructions

Page: 31 / 92

Venkon
Assembly, installation and operating instructions
31
Fig. 24:
Do not use feed nuts to secure the outlet box in place!
IMPORTANT NOTE: Do not use the feed nuts of the condensate tray to fix the
outlet box in place! They are
solely intended for the installation of wall and ceil-
ing cases!
If the feed nuts are used to fix another duct connection in place, then use hex
nuts that can be loosened again for maintenance purposes!
Fig. 25:
Press the hotel diffuser from outside onto the frame of the outlet box so that it
lies flush.
Fig. 26:
Use retaining screws to fix the hotel diffuser in place on the left and right.
IMPORTANT NOTE!
Protect accessories from dust and dirt
Basic units are fitted as standard with dust protection (blue film). Remove the dust protection before in-
stalling the sheet steel accessories or commissioning the unit. Ensure that all parts are also protected from
dirt on site after installation until initial commissioning.