12
1.57
TIP unit heaters
Unit heaters with 2-stage three-phase motor / Unit heaters with 1-stage single-phase motor
Installation and operating instructions
7. Hydraulic connections
Connect the TIP as per the labels on the product.
Route the pipes so that no mechanical stresses are transferred to the
heat exchanger and the unit can be accessed with ease for
maintenance and repair work.
Provide ventilation and drainage for the pipes on site.
Properly seal pipe connections not in use.
Important note:
The LPHW heat exchanger is suitable for use with hot water heating
systems in compliance with DIN 18380. Ensure that operating
conditions and water quality conform to VDI 2035 and comply with
industry-standard installation regulations.
Caution!
Hold the connections on the heat exchanger with a pipe
wrench or other suitable tool when connecting the pipework.
Summary of Contents for TIP 54 Series
Page 27: ......
