9
TIP unit heaters
1.57
Unit heaters with 2-stage three-phase motor / Unit heaters with 1-stage single-phase motor
Installation and operating instructions
Please read these instructions in full to ensure correct and proper
installation and the correct operation of TIP unit heaters.
Please note the following safety-relevant information
Disconnect all parts of the system that are being worked on.
Ensure that the system cannot be accidentally re-connected!
Before commencing installation/maintenance work, wait until
the fan has come to a standstill after the unit has been switched
off. After working on the unit, remove any tools, the short circuit
detector or any other objects from the unit.
Caution! Pipes, casings and fittings can become very hot or very
cold depending on the operating mode!
Caution! Wear gloves, safety shoes and suitable protective clothing
when transporting the unit! Sharp edges cannot be ruled out
despite care during manufacture.
The operator of the unit is responsible for the EMC conformity
of the entire system in accordance with the local applicable
standards.
Modifications to the unit
Do not undertake any modifications or upgrades to the TIP without
discussing them with the manufacturer as they can impair the safety and
operation of the unit.
Do not carry out any measures on the unit not described in this
manual. Make sure that on-site systems and cabling are suitable
for connection to the intended system!
Summary of Contents for TIP 54 Series
Page 27: ......
