3
1. Intended Use
Kampmann
Ka
therm
NX are built in line with the state of the art and
recognised safety regulations. Nevertheless their use may result in danger
to people or damage to the unit or other material property if they are not
properly installed or properly used.
Ka
therm
NX should only be used indoors (e.g. living space, offices, showrooms
etc.) They are not suitable for use in humid environments, such as swimming
pools or outdoors. The products should be protected from any moisture
during installation. Check the application with the manufacturer in case of any
doubt. Any use other than the use specified above is deemed not to be
correct and proper. The operator of the unit is solely responsible for any
damage resulting from such use. Correct and proper use is deemed to include
observing the installation information described in these instructions.
The installation of this product requires specialist knowledge of heating,
cooling, ventilation and electrical engineering. This knowledge, generally
learned in vocational training in the fields mentioned in section 2, is not
described separately. Errors with the connection or modifications may lead
to the unit being damaged! The manufacturer shall not be liable for any
damage caused by an incorrect connection and/or improper handling.
Ka
therm
NX
1
Linear grille (alternative: roll-up grille)
2
PowerKon heat exchanger
3
Floor duct
4
Flow, 1/2"
5
Return, 1/2"
6
Height-adjustment feet with sound insulation
7
Raised floor mounting feet with sound insulation
8
Struts
9
Pipe conduit for water connection
bl
Cable conduit
bm
Connection cover
Example shown: Ka
therm
NX 225
2
3
1
4
7
5
6
8
9
bm
bl
Ka
therm
NX -
Natural Convection
3.45
Intended Use
Caution:
Do not remove struts
