Kampmann KaDeck, Assembly, Installation And Operating Instructions

Page: 25 / 72

KaDeck
Assembly, installation and operating instructions
25
Fig. 18: Insulation as far as the thread
Make sure that the insulation and corrugated pipes are not damaged. Push
on the insulation as far as the thread of the corrugated pipes!
Fig. 19: Routing the actuator cable
Place the actuator on the valve. Route the cable to the electrical connection
box as per the diagram on the fan.
Fig. 20: Opening the electrical connection box
Use a Phillips screwdriver to open the electrical connection box and connect
up the valves according to the wiring diagram.
Fig. 21: Fixing the condensate hose to the con-
densate pump
Fasten the condensate hose to the condensate pump with units with con-
densate pump. Insert the hose through the opening provided on the hous-
ing and connect to the drain on site.