24
1.50
Airblock FG
Slimline air handling unit for decentralized, dynamic air treatment
Installation and Operating Instructions
8. Connecting Airblock Modules
Fig. Airblock module (simplified diagram)
1
Node profile
2
Node profile guide
3
M8 x 16 ratchet screw
4
Housing
5
Service hatch
Screw the modules together using the connecting elements included in the
pack. Screw two modules to four connection points in the corners of the
housing.
Installation steps for a connection point:
The corners of the housing can be accessed through the service hatch. The
filter inserts (ISO ePM10 70%, ISO ePM2,5 65% or H13) must be removed
from the module if necessary to ensure optimum accessibility.
1. Open service hatch
5
.
2. Use two tapping screws to screw the node profile
1
to the housing
4
.
3. Use two tapping screws to screw the node profile guide
2
to the adjacent
housing.
4. Position the modules in such a way that the drill holes of the screwed
node profile
1
, node profile guide
2
and housing are located one above
the other; use the M8 x 16 ratchet screw to screw the modules to the
connection point.
1
2
3
4
5
4
Summary of Contents for Airblock FG Series
Page 51: ......
