4
1.50
Airblock FG
Slimline air handling unit for decentralized, dynamic air treatment
Installation and Operating Instructions
1. Intended Use
The Kampmann Airblock range offers an all-purpose air handling system for
a range of different applications. Kampmann Airblock units are built in line
with the state of the art and recognised safety regulations. Nevertheless
their use can result in danger to people or damage to the unit or other
material property if they are not properly installed or properly used.
The units are solely intended for heating, cooling and ventilation. Any use
other than the use specified above is deemed not to be correct and proper.
The user/operator of the unit alone will be liable for any damage resulting
from this. Correct and proper use is deemed to include observing the
instructions relating to safety, operation and commissioning/maintenance.
Any sound-absorbing measures needed, such as isolation of the air ducts,
have to be done on site!
Protect the products from any moisture during storage and installation.
Check the application with the manufacturer in case of any doubt. Any use
other than the use specified above is deemed not to be correct and proper.
The operator of the unit is solely responsible for any damage arising as a
result of this.
The installation of this product requires specialist knowledge of heating,
cooling, ventilation and electrical engineering. This knowledge, generally
learned in vocational training in the fields mentioned in section 2, is not
described separately. Damage caused by improper installation is the
responsibility of the operator.
Airblock supply air modules are not suitable for connecting to cold
water!
Chiller modules from the accessories range are intended for use for cooling
mode. These are suitable for connection to CPW (cold potable water, type
**302140) or for refrigerant (type **302230) and have an integral
condensation tray below the heat exchanger for a horizontal fitting position.
Operating limits for the unit
Caution!
Frost protection must always be used if there is a risk of frost!
Place of installation
Airblock FG is intended for use in dry, dust-free and frost-free interior rooms
and must be protected from the wind and weather. Temperatures should
ideally be between 5 °C and 30 °C.
Summary of Contents for Airblock FG Series
Page 51: ......
