background image

4

5

4445103822

9

If the inner tent is not already installed, take the inner tent 
inside and suspend from the colour coded buckles. Attach 
the remaining suspension points.

Attach the base of the inners to the corresponding buckles 
on the groundsheet.  It will be easier to attach the rear 
points before fully suspending the inner tent.
The inner tent can remain permanently installed whilst the 
tent is deflated and inflated. 
Install the canopy groundsheet by pegging through the 
webbing straps found at each corner.

10

Seams

The main seams of this tent have been factory taped to help prevent leakage. Depending upon your expectations, it may be 
necessary to treat the remaining seams with a seam sealant.  Seam sealant should also be applied to areas where the taping 
is damaged or has peeled away through wear and tear.  It can also be applied to areas where a leak may have developed.  
Kampa Seam Sealant is available through your dealer. 

Pegs

The tent comes complete with general purpose wire pegs. These will be suitable for many sites but there will be some 
instances where different pegs will be necessary. Your dealer will stock a range of pegs suitable for different types of ground.  
For maximum effectiveness, pegs should be driven into the ground at a 45°angle away from the pegging point. 

Guy Ropes

The tent comes with guy lines pre-attached.  We recommend that these guy lines are used at all times.   Peg the guy lines so 
that the tent is under tension without distorting the shape.  The guy lines can be adjusted using the runners.  Guy lines should 
be secured using suitable pegs (see above) and the guy line should generally be pegged in line with the seam of the tent it 
starts from.  Check the guy lines from time to time to ensure that they are still adequately tensioned.

Rain

We make our tents as resistant to the weather as possible.  Occasionally you may find slight leakage.  This is not a fault with 
the manufacturing process or materials and can normally be rectified by spot treating the seam with seam sealant (see 
below). 

KampaKielder4-5-6AirDeluxe_OPM_4445103822_EMEAen_20xx-xx-xx.indb   5

KampaKielder4-5-6AirDeluxe_OPM_4445103822_EMEAen_20xx-xx-xx.indb   5

23.09.2022   10:51:11

23.09.2022   10:51:11

Summary of Contents for Kielder 4 AIR Deluxe









Reviews: