6
4445103822
7
Deflation/Pack-Down
1.
Close all doors, openings, windows and blinds including those on the inner tent.
2.
Unpeg the guy lines and tie them neatly to avoid tangling.
3.
Remove the front canopy pole
4.
Unpeg the intermediate pegging points but keep the four corner pegs in place.
5.
Open the valves on each pole. The tent will start to deflate. Wait until most of the air has been expelled.
6.
Unpeg the four corners.
7.
Fold/roll the tent towards the deflation valves to expel more air and then roll to fit in the carry bag.
Note: Ensure that the tent is totally dry before storing in a cool, dry and dark space, if possible opened out.
Care
Tents are best stored opened out. Air fully and ensure it is totally dry before packing away. Store in a well-ventilated dry
place. A wet/damp ten will develop mildew surprisingly quickly. Dirty tents can be washed using clean water and a soft brush.
Do not scrub and never use detergents.
The AIR Poles do not need any maintenance but should be protected from damage during storage. Damage due to improper
use, wind damage or neglect is not covered under the warranty. Have any damage repaired at the first opportunity.
Zips should be treated with care, use two hands to close and open and never tread on them. Never force a zip. We strongly
recommend that you carry a comprehensive spares kit including silicone waterproof spray, seam sealer and tape for repairing
the AIR Poles.
Repairs to the tent should be made by a company recommended by Kampa or your supplying retailer. Repairs and alterations
made by an unauthorised company may invalidate your warranty.
In the Event of a Puncture
1.
Undo the inflation/deflation valve from the pole and re-attach ensuring that the valve is firmly connected.
2.
Re-inflate the AIR Pole.
3.
If tightening the hose fittings does not solve the problem then the AIR Pole may be punctured.
To Remove an AIR Pole
1.
Unzip the outer sleeve holding the AIR Pole.
2.
Remove the AIR Pole.
3.
Unzip the protection sleeve of the AIR Pole, whilst deflated, to expose the inflatable bladder.
4.
Locate the puncture. This is made easier if you inflate the bladder. For small holes it may be necessary to submerge the
bladder in water.
5.
Once located, the bladder can be repaired using repair tape. We recommend Kampa Repair Tape - available from your
retailer.
The repair can be enhanced by using a combination of the tape with Kampa Repair Solution. Follow the manufacturers
instructions to repair. Another alternative is to replace the tube. Spares are available from your retailer or direct from Kampa
Once a repair or replacement has been made, the AIR Pole can simply be zipped back into the outer sleeve.
KampaKielder4-5-6AirDeluxe_OPM_4445103822_EMEAen_20xx-xx-xx.indb 6
KampaKielder4-5-6AirDeluxe_OPM_4445103822_EMEAen_20xx-xx-xx.indb 6
23.09.2022 10:51:11
23.09.2022 10:51:11
