6
7
4445103822
Warranty
The statutory warranty period applies. If the product is defective, please contact the manufacturer’s branch in your country
For repair and warranty processing, please include the following documents when you send in the device:
•
A copy of the receipt with purchasing date
•
A reason for the claim or description of the fault
The warranty covers manufacturing defects, materials and parts. The warranty does not cover fading of the cover and wear
and tear due to UV radiation, misuse, accidental damage, storm damage, or permanent, semi-permanent or commercial use.
It does not cover any resulting damage. Please contact your dealer for claims. This does not affect your statutory rights.
Problem
Solutions
Difficulty in
pumping up
the tent
1. The inflation valve is not fully screwed into the AIR Pole.
2. The AIR Pole is twisted at the valve. This may also be indicated by a noise. DO NOT continue
to inflate until the AIR Pole has been untwisted (see page 4).
If you suspect
an air leak
1. Check that the inflation valve is properly screwed in and that the black ‘O’ ring seal is in place.
2. Check that the top cap on the inflation valve is done up tightly.
If you think your
tent has a
water leak
Most suspected leakage is actually condensation (see condensation section of this manual).
This forms on the inside of the tent fabric. Try to increase the ventilation by opening doors and
ventilation ports. Do not cook in your tent. The fabric used to make this tent is waterproof tested
to 200 L/m² per hour. It is extremely unlikely that the tent would leak.
If your tent has a
water leak at
specific points/
areas
The main seams of this tent have been factory taped to help prevent leakage. Depending upon
your expectations, it may be necessary to treat the remaining seams with a seam sealant. Seam
sealant should also be applied to areas where the taping is damaged or has peeled away through
wear and tear. It can also be applied to areas where a leak may have developed. Seam sealant is
available through your retailer.
Troubleshooting
Technical data
Disposal
Place the packaging material in the appropriate recycling waste bins wherever possible.
Consult a local recycling center or specialist dealer for details about how to dispose of the product in accordance
with the applicable disposal regulations.
Kielder 4
AIR Deluxe
Kielder 5
AIR Deluxe
Kieder 6
AIR Deluxe
Dimensions H x W x D (in cm)
620 x 305 x 200
690 x 345 x 205
710 x 380 x 210
Packing dimensions H x W x D (in cm)
80 x 43 x 41
80 x 45 x 42
80 x 46 x 43
Weight
21.10 kg
25.48 kg
27.58 kg
KampaKielder4-5-6AirDeluxe_OPM_4445103822_EMEAen_20xx-xx-xx.indb 7
KampaKielder4-5-6AirDeluxe_OPM_4445103822_EMEAen_20xx-xx-xx.indb 7
23.09.2022 10:51:11
23.09.2022 10:51:11
