4
2
3
IMPORTANT
It is important that whilst
unscrewing/replacing the inflation/
deflation valve that the valve does
not spin in the AirPole. You can
prevent this from happening by
holding the valve in place where it
meets the AirPole. In picture (2) the
left hand is holding the valve in
place. If the valve spins it will twist
the inflation tube in the pole and
may lead to premature failure. If you
suspect this has happened do not
inflate your tent before untwisting the
tube. Unscrew the valve from the
AirPole and check that the inflation
tube is not twisted. Before replacing
the valve ensure that the black
sealing washer is in place (3).
WARNING
NEVER OPEN THE ZIP ON THE
INNER TUBES WHILST THE POLES
ARE INFLATED. THIS WILL RESULT
IN THE POLE BURSTING.
Unroll and lay the tent out in the
required position (1). Peg each
corner of the tent ensuring that you
tension the tent between the pegs
and making sure that the tent keeps
it rectangular shape. You will
probably need to re-peg later.
1
