6
If the inner tent is not already installed,
take the inner tent inside and suspend
from the colour coded buckles (8).
Attach the remaining suspension
points.
Attach the base of the inners to the
corresponding buckles on the
groundsheet (9). It will be easier to
attach the rear points before fully
suspending the inner tent.
The inner tent can remain permanently
installed whilst the tent is deflated and
inflated.
8
9
10
The tent comes with guy lines pre-
attached. We recommend that these
guy lines are used at all times. Peg
the guy lines so that the tent is under
tension without distorting the shape
(10). The guy lines can be adjusted
using the runners. Guy lines should be
secured using suitable pegs (see
below) and the guy line should
generally be pegged in line with the
seam of the tent it starts from. Check
the guy lines from time to time to
ensure that they are still adequately
tensioned.
Install the canopy groundsheet by
attaching the toggles, on the
groundsheet, to the corresponding ‘O’
rings situated around the inside of the
canopy.
