12
NOTE:
For optimal steam power,
leave an interval of 4 seconds
between pressing the shot of
steam button.
Using the Fine Mist Spray
The fine mist spray can be used to
dampen difficult to iron fabrics, dry areas,
woollen items and accidental creases.
Position the iron on the fabric, pointing
the iron tip towards the desired area.
Firmly press the fine misting spray
button and a fine spray of water will be
produced from the spray nozzle at the
front of the iron.
Anti-Drip System
The Steamline Detach also features
an anti-drip system. The iron will
automatically close the steam valve
when the soleplate temperature is too
low to produce steam. This prevents
water from the water tank escaping
through the soleplate. The steam valve
will open again once the soleplate
reaches the required temperature.
CAUTION:
The iron
incorporates a thermal
safety fuse to protect the
iron from overheating.
However, the iron should
not be left unattended
while it is connected to
the power outlet. Special
care should always be
taken when there are
children in the vicinity of
the iron.
Safety Auto-Off
The Steamline Detach features 3 way
auto-off safety protection. This feature
is designed to automatically switch the
iron off if it is left unattended with no
movement for a specified period of time.
When the iron is left in a horizontal
position, resting face down on the
soleplate, or if it is accidentally tipped
onto its side, the auto-off feature will
activate after 30 seconds.
When the iron is left in a vertical position,
resting on its heel, the auto-off feature will
activate after 8 minutes.
When the auto-off feature activates,
the auto-off indicator light will begin to
flash and the iron will emit six beeps. The
auto-off indicator light will continue to
flash until the iron is moved or until it is
switched off and unplugged from the
power outlet.
To reactivate the iron, simply move it
until the auto-off light stops flashing and
remains illuminated. Allow two to five
minutes for the iron to reach the selected
temperature again.
CAUTION:
The safety
auto-off is designed as
a safety feature only.
The iron should not
deliberately be left on
while unattended. If
the safety auto-off has
activated and no further
ironing is required, the
iron should be switched
off and unplugged from
the power outlet.
CAUTION:
Always turn
the temperature control
dial to MIN, switch off and
unplug the iron from the
power outlet when not
in use.
Using Your Kambrook Iron
continued...
Summary of Contents for Steamline KIR795
Page 2: ...Suits all KIR795 models INSTRUCTION BOOKLET ...
Page 17: ...16 Notes ...
Page 18: ...17 Notes ...
