8
Inserting the Beaters
1.
Attach the beaters by pressing
the ‘Tilt’ button and lifting the
mixer head up until it stops (See
Fig. 2). Release the ‘Tilt’ button.
The mixer head will lock into the
elevated position.
Fig. 2
2.
Ensure the correct beaters are
inserted into the corresponding
socket, as indicated by the icon
images located on the underside
of the mixer head. One of the
beaters is shaped like a cone and
has a nylon button on the bottom.
The other beater is square-shaped.
Each beater only fits into its proper
socket. The beaters should be
inserted with a slight twisting
action until they click firmly into
place and hold tight.
L
R
NOTE:
It is important that the
two beaters are fully inserted
into their appropriate sockets
or your Stand Mixer will not
operate correctly.
Inserting the Dough Hooks
1.
Attach the dough hooks by
pressing the ‘Tilt’ button and lifting
the mixer head up until it stops.
2.
Ensure the correct dough hooks
are inserted into the corresponding
socket, as indicated by the icon
images located on the underside
of the mixer head. The dough
hooks should be inserted with a
slight twisting action until they click
firmly into place and hold tight.
L
R
NOTE:
It is important that the two
dough hooks are fully inserted
into their appropriate sockets
or your Stand Mixer will not
operate correctly.
Assembly and Operation of Your Kambrook
Stand Mixer
continued
