background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

Important Safeguards For Your Kambrook  

Ceramic Oscillating Heater

•  Carefully read all instructions before operating the 

Heater and save for future reference.

•  Remove any packaging material and 

promotional stickers before using the heater for 

the first time.

•  Connect only to 230V or 240V power outlet.
•  Avoid touching heater body while it is on, some 

parts of the heater are hot. When moving the unit 

switch off and hold the Heater by the handles 

where provided. 

•  Keep combustible materials such as drapes and 

other furnishings at least 1.7 metres from the front, 

sides and rear of the heater. Do not use heater to 

dry your laundry. 

•  Extreme caution and supervision is necessary 

when this heater is used by or near children, 

invalids or animals. 

•  Children should be supervised to ensure that they 

do not play with the heater.  

WARNING:

 In order to 

avoid overheating, do 

not cover the heater.

IMPORTANT:

 This heater 

is intended for floor use 

only. Do not mount on 

ceiling or walls.

•  Do not operate the heater on an incline plane. 

Do not leave while the heater is switched on.

•  Do not leave heater unattended. Always switch 

off the heater at the controls and at the power 

outlet then unplug heater from the power outlet 

when not in use. 

•  Do not operate heater whilst asleep. 
•  Do not operate any heater with a damaged 

cord or plug, or if heater has been dropped or 

damaged in any manner. Return heater to your 

nearest Kambrook service centre for examination, 

electrical or mechanical adjustment or repair.

•  Do not operate the heater with the power cord 

damaged, frayed or split, wound around any part 

of the heater, or in contact with heated surfaces 

of the heater.

•  Do not run the cord under carpeting or cover the 

cord with rugs, runners or the like. Arrange cord 

away from traffic areas and where it will not be 

tripped over. 

•  Do not locate the heater immediately below a 

socket outlet when in use. 

•  Do not use this heater with a programmer, timer 

or any other device that switches the heater 

on automatically since a fire risk may exist if the 

heater is covered or positioned incorrectly. 

•  This heater is not intended for use in wet or moist 

locations. Do not use this heater in the immediate 

surroundings of a bath, a shower or a swimming 

pool. Do not immerse or allow liquids to be spilt 

on heater. 

•  Do not use the heater to dry your laundry. 

 

Summary of Contents for KCE95













Reviews: