Kambrook KBL200, Manual

Page: 5 / 10

Place liquids into blender jug before solid
ingredients except where specified in recipes.
Cut all food into small cubes (approx 2-3 cm
square) to achieve an even result.
If mixing hard and soft foods together, begin
with the hard foods, blend for a few seconds
and then add soft foods. Continue blending
until you have an even texture.
To add ingredients during blending, remove
the inner cap from the lid and drop solid
ingredients or pour liquids through the feeder
hole in the lid. Use a container with a pouring
lip, such as a measuring jug, when adding
liquids.
Place one hand on top of the blender lid and
hold it down when processing large quantities
of thin liquids. This will prevent the lid from
popping off due to excessive pressure.
Do not blend dry ingredients in this blender.
To blend thick or heavy mixtures, use the
pulse setting and do not blend for longer
than 1 minute without switching off the
blender and stirring the ingredients with a
plastic spatula. For normal blending tasks, for
example mayonnaise, dressings, etc, do not
operate for longer than 1 minute at one time.
Do not use the blender to store food.
Do not use the blender to beat egg whites as
it will not incorporate air.
Do not use the blender to mash cooked
potatoes.
Do not use the blender to knead dough or
other heavy mixtures.
Do not use the blender as a food processor.
Do not place large pieces of solid or frozen
foods into the blender jug. Always break
pieces before blending.
Do not remove the blender jug or lid while
the blender is operating. Always switch off
at the power outlet and unplug at the power
outlet before removing the blender jug.
Do not overfill by exceeding the maximum
mark on the blender jug. Some mixtures
increase in volume during blending.
Do not overload the blender with more than
specified amounts. Overloading could cause
the motor to stall. Switch the blender off by
turning the speed control dial to “0”, switch
off at the power outlet and unplug from the
power outlet then remove a portion of the
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
mixture before continuing.
Do not process boiling liquids or hot
ingredients. Allow hot ingredients to cool
before placing them into the blender jug.
Do not expose the glass jug to sudden
temperature changes (i.e.: immersing the jug
into hot water directly after immersing it into
cold water or vice versa.)
DISASSEMBLING / CLEANING YOUR
KAMBROOK BLENDER
Ensure the blender has stopped operation by
turning the speed control dial to “0”.
Switch off at the power outlet and unplug the
power cord.
Lift the blender jug upwards from the motor
base to remove.
Ensure all food has been removed from the
blender jug.
Wash the blender jug, lid, and inner cap in
warm, soapy water, rinse and dry thoroughly.
NOTE: A bottle cleaning brush may be used to clean
under and around the fixed blade assembly.
CAUTION: BLADES MUST BE
HANDLED CAREFULLY AS THEY ARE
SHARP
NOTE: Do not place any part of the blender in the
dishwasher.
NOTE: Do not immerse the motor base, power cord
or power plug in water or any other liquid.
CLEANING THE MOTOR BASE
The motor base can be cleaned with a soft, damp
cloth (do not use abrasive agents or cloths which
can damage the surface). Dry and polish with a
soft, lint free cloth.
STORAGE
Before storing, thoroughly wash and dry the
blender jug, lid and inner cap.
Assemble the blender and store on the
kitchen bench or in an easy to accessible
cupboard.
Store out of reach of children.
Store the appliance upright.
Do not store anything on top of the appliance.
•
•
•
•
•
•
•
•
•
•
•
•