Kambrook KBL200, Manual

Page: 4 / 10

This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure they
do not play with the appliance.
This appliance is suitable for domestic use
only. Do not use in moving vehicles or
boats. Do not use outdoors. Do not use this
appliance for anything other than its intended
use. Misuse may cause injury.
It is recommended to regularly inspect
the appliance. Do not use the appliance if
power supply cord, power plug, or appliance
becomes damaged in anyway. Return the
entire appliance to the nearest authorised
Kambrook Service Centre for examination
and/or repair.
Any maintenance, other than cleaning, should
be performed at an authorised Kambrook
Service Centre.
The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using
electrical appliances. It is advisable that a
safety switch with a rated residual operating
current not exceeding 30mA be installed in
the electrical circuit supplying the appliance.
See your electrician for professional advice.
USING YOUR KAMBROOK
BLENDER
BEFORE FIRST USE
Before using your Kambrook Blender for the
first time, remove and safely discard all packaging
material and promotional labels. Ensure the
appliance is switched off at the power outlet and
power cord is unplugged.
Wash the lid, inner cap and blender jug in warm
soapy water with a soft cloth. Rinse and dry
thoroughly (refer to disassembly and cleaning
instructions).
The motor base can be wiped with a damp cloth.
Dry thoroughly.
ASSEMBLING / OPERATING YOUR
KAMBROOK BLENDER
Place the motor base on a flat, dry surface. Ensure
that the blender is switched off by selecting “0”
on speed control dial, the power is switched off at
•
•
•
•
•
•
the power outlet and the power plug is unplugged
from the power outlet.
Place the blender jug onto the motor base.
Ensure that the blender jug is securely positioned.
Add food or liquid to the blender jug. Place the lid
on the blender jug, and push down to seal. Insert
the inner cap into the feeder hole of the blender
jug lid.
Plug the power cord into a 230V / 240V power
outlet and switch on at the power outlet.
Turn the speed control dial clockwise for speeds
1 and 2 or anti clockwise for pulse. The speed
can be changed at any time during the blending
process. Ideally, start mixing on speed 1 for 30
seconds and then speed 2 to blend until smooth.
For ingredients that require short burst of power,
use the pulse speed. This is ideal for liquids
containing ice or nuts.
To stop the blending at any time, turn the speed
control dial to “0”.
NOTE: During the blending process, ingredients may
stick to the sides of the blender jug. To push the food
back on the blades, turn the speed control dial to “0”,
switch the power off at the power outlet and remove
the power cord. Remove the lid and use a plastic
spatula to scrape down the sides of the jug. Replace
lid before recommencing blending.
NOTE: If the blades become stuck, immediately turn
the speed control dial to “0” and switch the power
off at the power outlet and remove the power cord.
Remove the lid and use a plastic spatula to dislodge
the food or liquid from the blades. Replace lid before
recommencing blending.
TIPS FOR THE BEST USE OF YOUR
KAMBROOK BLENDER
Ensure the maximum level on the blender jug
is not exceeded, the lid fits securely and the
inner cap is inserted.
Use speed 1 for dressings, marinades and
foods that require mixing until just combined.
Use speed 2 for pureeing, smoothie or
cocktail making.
Use Pulse for mixtures that require short
bursts of power such as liquids containing ice
and nuts.
Ensure all removable parts have been
thoroughly washed and dried before assembly.
Ensure the blender is correctly assembled
before operating.
Ensure the blender is used on a clean, dry
surface.
•
•
•
•
•
•
•