7
Operating Your Kambrook Handheld Vacuum
Before first use
Remove any promotional material
from the handheld vacuum.
When unpacking the handheld
vacuum, check to see you have
received all the required components,
such as the turbo brush, crevice tool
and small brush before discarding
the packaging.
WARNING:
Before
first use, charge your
handheld vacuum for at
least 24 hours. Make sure
that the power On/Off
switch is turned to the
‘OFF’ position before
charging otherwise the
handheld vacuum will
not charge.
Mounting the Wall Bracket
The charging base can be mounted
vertically to your wall or can be
placed horizontally on a flat surface.
To mount the charging base:
1. Choose a convenient position on
the wall which is within 1m of an
electrical power outlet.
2. Place the charging base vertically
parallel with the wall in the
desired location (see Fig.1).
Fig. 1
3. To correctly align the wall bracket
with the wall, using a pencil, mark
both the centre of the top screw
hole and bottom screw hole
located on the charging base.
4. Using a drill, drill a 5mm diameter
hole through the centre of the
top screw hole and bottom
screw hole where the pencil
marks are located on the wall.
5. With a washer first inserted onto
each screw, fix the two screws
into the holes at least 23mm long
into the wall.
6. Put the charger head into the
bracket hole from the back side
and then hang the bracket on
the fixed screws.
7. Slide the handheld vacuum
onto the wall bracket, ensuring
the handheld vacuum head is
pointing downwards alongside
the wall (see Fig.2).
NOTE:
Ensure the charging base
is mounted on the wall so that
the handheld vacuum head is
pointing downwards alongside
the wall when the handheld
vacuum is placed on the
charging base.
