background image

5

Important Safeguards For All  

Electrical Appliances 

•  Fully unwind the power cord before use.
•  Connect only to a 230V or 240V  

power outlet.

•  Do not let the power cord hang over 

the edge of a bench or table, touch 

hot surfaces or become knotted.

•  To protect against electric shock, do 

not immerse the power cord, power 

plug or appliance in water or any  

other liquid, unless it is recommended 

in the cleaning instructions.

•  The appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience 

and knowledge, unless they have 

been given supervision or instruction 

concerning use of the appliance, by  

a person responsible for their safety.

•  Children should be supervised to  

ensure that they do not play with  

the appliance.

•  It is recommended to inspect the 

appliance regularly. Do not use 

the appliance if the power supply 

cord, plug, connector or appliance 

becomes damaged in anyway. Return 

the entire appliance to the nearest 

authorised Kambrook Service Centre 

for examination and/or repair.

•  Any maintenance other than cleaning 

should be performed at an authorized 

Kambrook Service Centre.

•  This appliance is for household use only. 

Do not use this appliance for other than 

its intended use. Do not use in moving 

vehicles or boats. Do not use outdoors. 

Misuse may cause injury.

•  The installation of a residual current 

device (safety switch) is recommended 

to provide additional safety protection 

when using electrical appliances. It 

is advisable that a safety switch with 

a rated residual operating current 

not exceeding 30mA be installed in 

the electrical circuit supplying the 

appliance. See your electrician for 

professional advice.

•  Always turn the appliance to the OFF 

position, switch off at the power outlet 

and unplug at the power outlet when 

the appliance is not in use.

•  Before cleaning, always turn the 

appliance to the OFF position, switch 

off at the power outlet, unplug at 

the power outlet and remove the 

power cord, if detachable, from the 

appliance and allow all parts to cool.

•  Do not place this appliance on or near 

a heat source, such as hot plate, oven 

or heaters.

•  Position the appliance at a minimum 

distance of 20cm away from walls, 

curtains and other heat or steam 

sensitive materials and provide 

adequate space above and on all 

sides for air circulation.

Summary of Contents for Arctic HV KFA624













Reviews: