19
Now repeat the previous steps at the outer
surface.
8.2
REPAIRING CRACKS / SLICES
ADVISE: Fix the crack with our PLASTOCLIP. Melt in a
W-clamp or S-clamp to increase the plastic part and give
it more stability and flexibility.
Clean the damaged area around the crack
(inner and outer surface) with the supplied
grinder before starting the melting process.
A absolute fixation cannot be guaranteed
without grinding.
Start fusing the Melting-Strips with the plastic
component INSIDE! Place the Melting-Strip
approsimately 1 centimetre before the damage.
HINT: Control the tempo/ rate of grinding to
make sure that the material does not heated
again.
Use the adherence roller to fill the hole with
the warm Melting-Strip.
8.2.1
8.2.2
8.2.3
8.2.4
8.2.5
8.2.6
