www.KALORIK.com
9
AS 45493
–
200605
STORAGE
When not in use, it is recommended that the thickness adjustment dial
gets turned down all the way until the mark “
0
”, so that the blade’s
sharp edge is concealed - this to avoid any risk of accidental cuts or
injuries.
IMPORTANT INFORMATION
A lubricant paste is applied at the factory to ensure correct lubrication
for the first uses. After this, the first time the blade is removed, the user
can remove the extra lubrication paste or leave it. The paste is food
safe. No extra lubrication will be needed afterwards.
Cautiously cleaning the blade after use as indicated in the user manual
should avoid cross-contamination. Deep cleaning by removing the
blade is only necessary from time to time.
