background image

1

Dear Client,

We thank you for having chosen one of our products, the fruit of technological experience and of continual research for a 

superior quality product in terms of safety, dependability, and service.

In this manual you will find all the information and useful suggestions to use your product with the maximum safety and 

efficiency.

EN

Please remember that the first lighting of the insert must be handled 
by our Authorized Assistance Centre (Law 37/2008) who will check the 
installation and complete the guarantee.

!

• Incorrect installation, incorrectly performed maintenance, improper use of the product 

release the manufacturer 

from every eventual damage

 derived from the use of the insert.

• The unit 

cannot be used as an incinerator.

 

Do not use fuels other than pellets.

• This manual has been realized by the manufacturer and constitutes 

an integral part of the product

 and must remain 

with it during its entire lifetime. If the product is sold or transferred, 

be sure that the booklet is present since the 

information contained in it are addressed to the buyer

, and to all those persons of various titles who complete 

the installation, use and maintenance.

• 

Carefully read the instructions and the technical information

 contained in this manual, before proceeding with 

the installation, use, and any operation on the product.

• The observance of the indications contained in the present manual 

guarantees the safety of people and the pro-

duct, the economy of use and a longer functioning lifetime.

• Although the carefully studied design and the risk analysis done by our company has permitted the realization of a safe 

product, in any case, before effecting any operation on the insert, it is recommended to keep said manual available and 

pay scrupulous attention to the instructions written therein.

• Check the precise flatness of the pavement where the product will be installed

• 

The wall where the product will be placed must not be constructed in wood,

 or in any case, made of an 

inflammable material, and in addition it is necessary to maintain a safety distance.

• While the insert is in operation, several 

parts of the insert (door, handle, sides) can reach high temperatures.

 

Therefore pay attention and use the proper precautions, above all in the presence of children, elderly or disabled persons, 

and animals.

• Assembly must be performed by authorized persons (Authorized Assistance Centre).

• Diagrams and drawings are furnished for the purpose of illustration; the manufacturer, with the intent of pursuing a 

policy of constant development and renewal of the product 

can, without any notice, make any modifications 

that are believed opportune.

•  When the insert is working at its maximum speed, it is strongly suggested to 

wear gloves while handling

 with the 

door for pellets loading and the door handle. 

• 

Installation is not recommended in a bedroom.

Never cover the body of the insert in any way or obstruct the openings 
placed on the upper side when the device is operating. All our inserts are 
trial lighted on the construction line.

In the event of a fire, disconnect the power supply, use an extinguisher and call the fire fighters if neces-

sary. After that contact the Authorised Assistance Centre.

!

Summary of Contents for Chiara 15

























Reviews: