Kalmar Ottawa t2, Maintenance Manual

Page: 20 / 262

0.3 Checklists – C. Preventive Maintenance 11
Maintenance Manual Ottawa T2 4x2
Preventative Maintenance Form – Synthetic Transmission
Lubrication with High Capacity Filters
KALMAR TERMINAL TRACTOR PREVENTATIVE MAINTENANCE FORM
SYNTHETIC (TES-295) LUBE AND ALLISON HIGH-CAPACITY FILTERS USED IN THE TRANSMISSION
TRUCK NUMBER LOCATION TECHNICIAN HOURS DATE
EACH OF THE FOLLOWING ITEMS SHOULD BE CHECKED AND THE CORRESPONDING BOX MARKED WITH THE APPROPRIATE NOTATION.
√
= SATISFACTORY
0
= ADJUSTMENT NECESSARY
Χ
= REPAIRS NEEDED.
“A” INSPECTIONS SHOULD BE PERFORMED AT 250 HOUR INTERVALS, “B” INSPECTIONS AT 500 HOUR INTERVALS, “C” INSPECTIONS AT 1000 HOUR
INTERVALS, AND “D” INSPECTIONS AT 2000 HOUR INTERVALS.
OPERATION A B C D OPERATION A B C D
CAB – INTERIOR UNDER VEHICLE
CHECK OPERATION OF NEUTRAL START CHECK STEERING GEAR
CHECK OPERATION OF ALL GAUGES CHECK BRAKE LININGS AND DRUMS
CHECK LOW AIR BUZZER AND LIGHT CHECK SPRINGS
CHECK WINDSHIELD WIPER OPERATION CHECK SHOCK ABSORBERS (IF APP.)
CHECK WINDSHIELD WASHER OPERATION (IF APP.) TORQUE FRONT AXLE MOUNTING BOLTS
CHECK THROTTLE OPERATION TORQUE FRONT AXLE KING PIN DRAW KEY NUT(S)
CHECK HORN(S) OPERATION CHECK POWER STEERING PUMP
CHECK AIR SYSTEM – MINIMUM 120 PSI, MAXIMUM 130 PSI CHECK STARTER MOUNTING AND CONNECTIONS
CHECK AIR SYSTEM FOR LEAK DOWN CHECK ENGINE AND TRANSMISSION FOR LEAKS
CHECK OPERATION OF BACK UP ALARM CHANGE ENGINE OIL AND FILTER
CHECK HVAC SYSTEM CHANGE TRANSMISSION FILTERS 3000 HOURS
BLOWER MOTOR OPERATION CHANGE TRANSMISSION FLUID 6000 HOURS
TEMPERATURE CONTROL CHECK ENGINE AND TRANSMISSION MOUNTS
DEFROSTER OPERATION CHECK WHEEL SEALS FOR LEAKS
A/C OPERATION (IF APP.) CLEAN REAR AXLE BREATHER
AUXILIARY FAN(S) (IF APP.) CHECK DIFFERENTIAL FOR LEAKS
CHECK 5
TH
WHEEL UNLATCH CONTROL CHECK DIFFERENTIAL OIL LEVEL
CHECK OPERATION OF BOOM CHANGE DIFFERENTIAL OIL
CHECK OPERATION OF WINDOWS CHECK LIFT CYLINDERS FOR LEAKS
CHECK SEAT BELT SYSTEM PER 10-STEP INSPECTION TORQUE REAR AXLE MOUNTING BOLTS
CHECK OPERATION OF DOOR LATCHES CHASSIS
CHECK DOME LIGHT OPERATION CHECK FRONT WHEEL BEARINGS
CHECK ALL GLASS AND MIRRORS CHECK FRONT AXLE OIL LEVEL (IF APP.)
CHECK FIRE EXTINGUISHER CHARGE (IF APP.) REPACK FRONT WHEEL BEARINGS (IF APP.)
CAB DOWN – EXTERIOR CHECK BATTERY CABLES & HOLDDOWNS
CHECK SIDE DOOR HINGE (IFF APP.) CHECK BATTERIES FOR CRACKS OR DAMAGE
CHECK CAB ACCESS STEPS AND HANDLES CLEAN BATTERY CABLE CONNECTIONS
CLEAN HEATER / AC FILTER (IF APP.) CHECK BATTERY BOX COVER HOLDDOWNS
CHECK REAR DOOR ROLLERS / SLIDE ADJUSTMENT DRAIN WATER FROM AIR TANKS
CHECK GLADHAND SEALS AND TRAILER AIR LINES CHECK AND TORQUE ALL WHEEL NUTS
CHECK TRAILER LIGHT CORD CHECK WHEELS
CHECK HEADLIGHTS / MARKER LIGHTS CHECK TIRE AIR PRESSURE, TREAD DEPTH & CONDITION
CHECK TURN SIGNALS CHECK REAR AXLE PLANETARY FLUID LEVEL (IF APP.)
CHECK STROBE LIGHT (IF APP.) INSPECT PLATFORMS
CHECK SPOTLIGHTS CHECK FRAME FOR CRACKS
CHECK WIPER BLADES CHECK MUD FLAPS / FENDERS (IF APP.)
CHECK WINDSHIELD WASHER FLUID LEVEL CHANGE HYDRAULIC SYSTEM FILTER
CHECK TRANSMISSION FLUID LEVEL CHECK HYDRAULIC FLUID LEVEL
CHECK ENGINE OIL LEVEL CHANGE HYDRAULIC FLUID
CAB UP CLEAN HYDRAULIC TANK VENT
CHECK OPERATION OF CAB TILT PUMP CHECK CAB HINGE PINS AND BUSHINGS
CHECK CAB SAFETY PROP LUBRICATION
CHECK CAB SUSPENSION AND LATCH CHECK / LUBRICATE REAR DOOR ROLLERS
CHECK INTAKE DUCTING FOR LEAKS CHECK / LUBRICATE STEERING SLIP JOINT
CHECK RADIATOR FOR LEAKS CHECK / LUBRICATE STEERING U-JOINTS
CHECK RADIATOR MOUNTS CHECK / LUBRICATE ALL STEERING LUBE POINTS
CHECK COOLANT LEVEL AND CONCENTRATION CHECK / LUBRICATE SLACK ADJUSTERS
CHECK AND ADJUST COOLANT ADDITIVE (IF APP.) CHECK / LUBRICATE DRIVELINE U-JOINTS
CHANGE ENGINE COOLANT CLEAN, CHECK, ADJUST AND LUBE 5
TH
WHEEL JAWS
CHECK COOLANT HOSES AND CLAMPS CHECK AND LUBRICATE 5
TH
WHEEL TOP PLATE
CHECK FAN CLUTCH FOR OPERATION (IF APP.) CHECK AND LUBRICATE 5
TH
WHEEL PIVOT PINS
CHECK ENGINE COOLING FAN FOR CRACKS CHECK AND LUBRICATE BOOM PIVOT BEARINGS
CHECK ENGINE BELT(S) AND TENSIONER CHECK AND LUBE BOOM CYLINDER BEARING
CHANGE ENGINE COOLANT FILTER (IF APP.) ADD GREASE TO AUTOLUBE RESERVOIR (IF APP.)
CHECK ENGINE AND TRANSMISSION FOR LEAKS TEST DRIVE
DRAIN FUEL WATER SEPARATOR DRIVE VEHICLE TO CHECK FOR OVERALL OPERATION
CHANGE FUEL FILTER / FUEL WATER SEPARATOR
CHECK AIR RESTRICTION GAUGE (IF APP.)
CHANGE AIR FILTER
AS NEEDED
CHANGE AIR DRYER DESICCANT (IF APP.) AS NEEDED
CHECK EXHAUST SYSTEM
CLEAN TRANSMISSION BREATHER