INSTALLATION INSTRUCTIONS
Two-Handle Wall-Mount Bath Valve
1085232-2-
A
© 2013 KALLISTA
2 of 4
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
ThANk YOU FOR ChOOSINg kALLISTA
We appreciate your commitment to Kallista quality products. Please take a moment to review this manual
before you install your Kallista product. If you encounter any installation or performance problems, please do
not hesitate to contact us at the phone number listed at the bottom of the page.
BeFORe YOU BegIN
IMPORTANT!
This valve is intended for bath-only applications.
NOTe:
The installation of water hammer arrestors is not required but is recommended. Installing water hammer
arrestors may reduce or eliminate the possibility of water hammer when the user turns the handles to the ON or
OFF position.
Please read all instructions before you begin.
Observe all local plumbing and building codes.
Shut off the main water supply.
Before installation, unpack the components and inspect them for damage. Return the components to the
carton until you are ready to install.
Kallista reserves the right to make revisions in the design of products without notice, as specified in the
Price Book.
TOOLS ANd MATeRIALS
Propane
Torch
Pipe Wrench
Level
Assorted Screwdrivers
Strap Wrench
Solder
Sealant Tape
Plumbers Putty
Hacksaw or Tubing Cutter
Adjustable Wrench
Plus:
●
Conventional woodworking tools and materials
●
Lumber for backer boards
●
Screws for mounting valve body to backer boards
●
1/2" drop ear ell
●
1/2" NPT pipe
●
1/2" nipple
