INSTALLATION INSTRUCTIONS
Integrated Supply Elbow
1230883-2-
B
3 of 3
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Wall Bracket with
1. INSTALL THE PIPE NIPPLE
11/16" (17 mm) Beyond
Finished Wall
1/2" NPT
Nipple
Apply
sealant tape.
1-5/8" (41 mm) Max
3/8" (10 mm)
Max
Apply sealant tape to one end of a 1/2” NPT nipple.
Install the nipple to extend 11/16
″
(17 mm) beyond the
fi
nished wall.
Ensure the gap between the nipple and
fi
nished wall is no more than 3/8” (10 mm).
2. INSTALL THE WALL BRACKET
Outlet
Wall Bracket
Apply sealant tape.
Apply sealant tape to the exposed threads of the nipple.
Thread the wall bracket onto the nipple.
Using a clean strap wrench, tighten the bracket
fl
ush to the wall with the outlet oriented down.
Apply a bead of clear sealant around the perimeter of the bracket.
Turn on the water and allow water to
fl
ow through the bracket to
fl
ush out debris.
Check connection for leaks. Repair as needed.
