INSTALLATION INSTRUCTIONS
Handshower, Hose
& Handshower Accessories
1188577-2-E
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com
4 of 5
2. INSTALL THE FIXED WALL BRACKET (P24453)
Screw
Press and hold
legs together.
Anchor
Fixed Wall Bracket
13/16"
(21 mm)
Drill holes using a 5/16" bit.
Determine the location for the fi xed wall bracket.
Mark the hole locations for the wall anchors.
Drill the holes and install the wall anchors.
Attach the fi xed wall bracket to the wall with the screws.
3. INSTALL THE HANDSHOWER AND HOSE
Handshower
Washer
Fixed Wall Bracket
Handshower Connector
Supply Elbow
Washer
Elbow Connector
Insert a washer into the elbow connector end of the shower hose.
Attach the shower hose to the supply elbow. Run cold and hot water through the shower hose to fl ush out
dirt and debris.
Insert the other washer into the threads of the handshower connector.
Thread the handshower into the shower hose. Tighten with an adjustable wrench.
Turn on the water. Check for leaks and smooth operation.
Place the handshower in the fi xed wall bracket.
