Tools and Materials
Thank You For Choosing Kallista
We appreciate your commitment to Kallista quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kallista.
Before You Begin
Observe all local plumbing and building codes.
Turn off the main water supplies.
Carefully inspect all drain components for damage before
installing.
If installing a new bath, install the drain before installing the
bath.
For replacement drain installations, remove the wall covering
from the drain end of the bath and remove the existing drain.
Cover the bath with a drop cloth or similar material during
installation.
Use care to protect the product finish during installation.
The overflow ell and drain ell tubes may need to be cut for
proper fit. Measure carefully, cut them to the proper length and
remove any rough edges.
Hacksaw or
Tubing Cutter
Plus:
• Trap
Pipe
Wrench
Adjustable
Wrench
Plumbers
Putty
Thread
Sealant
Tape
Pliers
Assorted
Screwdrivers
1040186-2-A
2
Kallista
