INSTALLATION INSTRUCTIONS
One™ Console Table
1110776_2_A
6 of 6
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
STONe TOP HOLe FABRICATION (OPTIONAL)
7.
Three faucet holes have been partially drilled from the underside of the console top.
On the top, show surface, of the console top, locate the center of the required faucet holes. Using a
compass or circle template, draw a circle for the required holes.
Using a small hammer, create the faucet hole(s) by gently tapping the console top within the circles until the
stone breaks away.
NOTe:
dO NOT
strike the console top with too much force.
dO NOT
strike from the bottom side of the console
top. This will damage the top surface of the console top.
Using a file or sanding cylinder, complete the removal of stone material to create a clean round hole.
COMPLeTe THe INSTALLATION
8.
Install the faucet and drain according to the manufacturer’s instructions.
Connect the water supply and check for leaks.