INSTALLATION INSTRUCTIONS
One™ Wall-mount Bridge Kitchen Faucet
1102266_2_A
4 of 5
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
INSTALL The eSCUTCheONS
2.
X
Finished Wall
Pipe Nipple
Thread and
tighten the
escutcheons.
Escutcheon
Remove the caps from the pipe nipples.
Reinstall the escutcheons to the pipe nipples.
Measure and note the distance ″X″ from the end of the escutcheons to the finished wall.
Remove the escutcheons.
Remove the pipe nipples and measure their length.
Subtract distance ″X″ from the length of the pipe nipples. Discard the pipe nipples and replace them with
ones of proper length.
Apply sealant tape to both ends of the pipe nipples, then insert the pipe nipples into the elbows.
IMPORTANT!
If you are mounting the escutcheons to an uneven surface (such as tile grout lines), apply a suit-
able sealant to the backside of the escutcheons. Do not use petroleum based sealant.
Thread the escutcheons onto the pipe nipples.
NOTe: Be careful not to damage the finish on the escutcheons when tightening.
Tighten the escutcheons with a 7/8″ deep socket or 7/8″ open-end box wrench.
Ensure the escutcheons are aligned and level with one another. Further tighten the escutcheons, if neces-
sary.