INSTALLATION INSTRUCTIONS
One™ Wall-mount Bridge Kitchen Faucet
1102266_2_A
5 of 5
Questions? Problems? For additional assistance, please contact Kallista’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.
INSTALL The FAUCeT
3.
Not Correct
Setscrew
Aerator Tool
Correct
IMPORTANT!
Be careful not to damage the O-rings on the escutcheons during this procedure. The O-rings are
pre-installed in the escutcheons.
Carefully slide the faucet assembly onto the escutcheons.
Using a 1/8″ hex wrench, secure the faucet assembly to the escutcheons with setscrews. The setscrew
must be flush or recessed.
NOTe: If the setscrews are not flush: Loosen the setscrews, then remove the faucet assembly from the es
-
cutcheons. Reinsert the faucet assembly, then retighten the setscrews.
INSTALLATION CheCkOUT
4.
Turn both handles clockwise to the OFF position.
Verify that all connections are tight.
Turn on the main water supply.
Check all connections for leaks. Repair as needed.
Turn both handles to the ON position to run water through the faucet. Allow the water to run through the
spout to remove any debris.
Turn both handles to the OFF position.
NOTe: If water flow is restricted: Using the aerator tool (provided), turn the aerator clockwise to remove it from
the spout, remove the debris, then reinstall the aerator. Retain the aerator tool for future use.
