Installation
FineLine 200PC User’s Manual
Power Supply Coolant Return Hose
1. Connect one end of the Power Supply Coolant Return Hose to the coolant
return fitting on the rear of the power supply. Note that the coolant return
fitting has left hand threads.
6
2. Connect the other end of the Power Supply Coolant Return Hose to the
coolant out fitting on the RHF console. Note that the coolant out fitting has
left hand threads.
Work Ground Lead
1. Route one end of the #1/0AWG Work Ground Lead through the middle strain
relief on the rear of the power supply and connect it to the Work terminal.
7
2. Connect the other end of the Work Ground Lead to the star ground point on
the cutting table. The star ground point is generally referred to as the common
ground point on the cutting table where all subsystems of the machine are
grounded. This point is then connected to a driven earth ground rod that
should be as close as possible to the star ground. The ground rod should have
no other wires connected to it. The ground rod should be at least 3/4 inches in
diameter and should be driven into the earth’s permanent moisture layer. The
length of the ground rod varies from installation to installation and should be
installed according to local and national codes. Refer to the National
Electrical Code, Article 250, Section H, Ground Electrode System for
additional information.
RHF Console Ground Connection
8
Perform the following steps to connect the chassis of the RHF Console to the
cutting table. See Figure 3-3 for additional information.
1. Connect one end of the RHF Console Ground Lead to the ground stud on the
RHF console.
2. Connect the other end of the RHF Console Ground Lead to chassis ground on
the cutting table. Make sure that good metal-to-metal contact is made.
3-6
Summary of Contents for FineLine 200PC
