KALATEL Calibur DSR-2000e, User Manual

Page: 30 / 58

Calibur DSR 4-2 0150-0163f
o
Main Menu
→
Time/Date
→
Set Time
Time Setup
HH MM SS
03 05 53
[CANCEL] [OK]
To set the Time:
1. With
HH MM SS
highlighted, press the Enter button. The
highlighting will move to the row of numbers.
2. Enter the time in Hours, Minutes, and Seconds. Use the Jog to
change the values. Use the Shuttle to navigate among the
three fields.
3. Press the Enter button to confirm the selection.
4. To Save the changes and Exit the menu: Use the Jog to
select
[OK]
, then press the Enter button.
--OR--
5. To Exit the menu without making changes: Use the Jog to
select
[CANCEL]
, then press the Enter button.
o
Main Menu
→
Time/Date
→
Set Date
Date Setup
MM DD YY DAY
12 17 00 SUN
[CANCEL] [OK]
To set the Date:
1. Press the Enter button. The highlighting will move to the row of
numbers.
2. Enter the date in Months, Days, Years. Day of the Week will
update automatically. Use the
Jog to change the values. Use
the Shuttle to navigate among the three fields.
3. Press the Enter button to confirm the selection.
4. To Save the changes and Exit the menu: Use the Jog to
select
[OK]
, then press the Enter button.
--OR--
5. To Exit the menu without making changes: Use the Jog to
select
[CANCEL]
, then press the Enter button.
4.2 Main Menu
→
Alarms
Alarms Menu
Hardwire Alarm : Enable
Teletext Alarm : Disable
Alarm Buzzer : Enable
[CANCEL] [OK]
Use this menu to specify:
•
Whether an alarm condition will be activated when the
unit detects a signal on the Alarm In connection.
•
Whether a teletext alarm signal (generated by a
multiplexer or other device) will cause the unit to
activate an alarm condition.
•
Whether the internal buzzer is activated during an
alarm condition.
A feature unique to the DSR is its ability to detect alarms via teletext provided within the video signal.
Standard Time Lapse VCRs can only detect an alarm if the alarm output signal of the Mux is wired
directly to the alarm input of the VCR using the VEXT connection.