Kalamazoo Outdoor Gourmet K1000HB, Use And Care Manual

Page: 36 / 90

www.KalamazooGourmet.com 32
Cooktop Burners
1.
Remove the stainless steel cover from the cooktop burners (see Figure 13:R page 26).
2.
Make sure all control knobs are in the OFF position.
3. Turn the main gas supply on.
4. Keeping your face well away from the unit, press in the COOKTOP BURNER control knob (see Figure
18:D page 28). You should hear a rapid clicking noise from the electronic ignition. While continuing
to press in the control knob, turn it to the HIGH position. Ignition should take place within 4 to 5
seconds. If the burner does not light within 4 to 5 seconds, turn the knob to the OFF position and wait
5 minutes for the gas to dissipate before trying again. If you do not hear clicking from the electronic
ignition system, refer to the troubleshooting section of this Use and Care Guide.
5. NEVER PLACE THE COOKTOP BURNER COVER OVER THE COOKTOP BURNERS WHILE THE
BURNERS ARE IN OPERATION.
Manual Lighting Procedure:
Main Burners
1.
Open the grill hood
2.
Make sure all control knobs are in the OFF position.
3. Turn the main gas supply on.
4. Pull open the Hybrid Fire Grilling Drawer 6 inches.
5.
Keeping your face well away from the unit, hold a match or lighter wand in front of the opening at the end of the
flash tube (see Figure 12:L page 25). Press in the
IGNITION BURNER control knob (see Figure 18:A page
28) and turn it to the HIGH position. Ignition should take place within 4 to 5 seconds. You will see and hear the
flash at the end of the flash tube when the ignition burner ignites. If the burner does not light within 4 to 5
seconds, turn the knob to the OFF position and wait 5 minutes for the gas to dissipate before trying again.
6. Once the ignition burner is lit,
light the main burners according to the standard lighting procedure.
Rotisserie Burner(s)
1. Open the grill hood
2. Make sure all control knobs are in the OFF position.
3.
Turn the main gas supply on.
4.
Keeping your face well away from the unit, hold a match or lighter wand in front of the ROTISSERIE
BURNER. Press in the ROTISSERIE BURNER control knob (see Figure 18:C page 28) and turn it to the HIGH
position. Ignition should take place within 4 to 5 seconds. If the burner does not light within 4 to 5 seconds,
turn the knob to the OFF position and wait 5 minutes for the gas to dissipate before trying again.
Cooktop Burners
1.
Remove the cover from the cooktop burners.
2.
Make sure all control knobs are in the OFF position.
3. Turn the main gas supply on.
4. Keeping your face well away from the unit, hold a match or lighter wand at the side of the COOKTOP
BURNER. Press in the COOKTOP BURNER control knob (see Figure 18:D page 28), and turn it to the HIGH
position. Ignition should take place within 4 to 5 seconds. If the burner does not light within 4 to 5 seconds,
turn the knob to the OFF position and wait 5 minutes for the gas to dissipate before trying again.
1.
Read instructions before lighting.
2. Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off, wait 5
minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the ignition
burner control off, wait 5 minutes, and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH position. The main
burner will light from the ignition burner. If ignition does not occur within 5 seconds,
turn the main burner controls off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the
rotisserie burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Press in the cooktop burner control and turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the cooktop
burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2. Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off,
wait 5 minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the ignition burner control off, wait 5 minutes,
and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH
position. The main burner will light from the ignition burner. If ignition
does not occur within 5 seconds, turn the main burner controls off, wait
5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the rotisserie burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Remove the burner cover before operation.
Press in the cooktop burner control and turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the cooktop burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2.
Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off, wait 5
minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the ignition
burner control off, wait 5 minutes, and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH position. The main
burner will light from the ignition burner. If ignition does not occur within 5 seconds,
turn the main burner controls off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the
rotisserie burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Press in the cooktop burner control and turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the cooktop
burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2. Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off,
wait 5 minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the ignition burner control off, wait 5 minutes,
and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH
position. The main burner will light from the ignition burner. If ignition
does not occur within 5 seconds, turn the main burner controls off, wait
5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the rotisserie burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Remove the burner cover before operation.
Press in the cooktop burner control and turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the cooktop burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2. Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off, wait 5
minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the ignition
burner control off, wait 5 minutes, and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH position. The main
burner will light from the ignition burner. If ignition does not occur within 5 seconds,
turn the main burner controls off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the
rotisserie burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Press in the cooktop burner control and turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the cooktop
burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2. Open lid during lighting.
3.
If ignition does not occur in 5 seconds, turn the burner control(s) off,
wait 5 minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the ignition burner control off, wait 5 minutes,
and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH
position. The main burner will light from the ignition burner. If ignition
does not occur within 5 seconds, turn the main burner controls off, wait
5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the rotisserie burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Remove the burner cover before operation.
Press in the cooktop burner control and turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the cooktop burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2. Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off, wait 5
minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the ignition
burner control off, wait 5 minutes, and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH position. The main
burner will light from the ignition burner. If ignition does not occur within 5 seconds,
turn the main burner controls off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the
rotisserie burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Press in the cooktop burner control and turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the cooktop
burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2. Open lid during lighting.
3.
If ignition does not occur in 5 seconds, turn the burner control(s) off,
wait 5 minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the ignition burner control off, wait 5 minutes,
and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH
position. The main burner will light from the ignition burner. If ignition
does not occur within 5 seconds, turn the main burner controls off, wait
5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the rotisserie burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Remove the burner cover before operation.
Press in the cooktop burner control and turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the cooktop burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2.
Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off, wait 5
minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the ignition
burner control off, wait 5 minutes, and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH position. The main
burner will light from the ignition burner. If ignition does not occur within 5 seconds,
turn the main burner controls off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the
rotisserie burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Press in the cooktop burner control and turn to the HIGH position. Continue pressing
in until the burner lights. If ignition does not occur within 5 seconds, turn the cooktop
burner control off, wait 5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2. Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off,
wait 5 minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the ignition burner control off, wait 5 minutes,
and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH
position. The main burner will light from the ignition burner. If ignition
does not occur within 5 seconds, turn the main burner controls off, wait
5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the rotisserie burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Remove the burner cover before operation.
Press in the cooktop burner control and turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the cooktop burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner