Kalamazoo K500HB-2-NA, Use And Care Manual

Page: 22 / 64

+1.800.868.1699 39 KalamazooGourmet.com 38
Main Burner Controls: Controls the flame
on the main burners. Hybrid Fire Grills
have two, three or four main burners
depending on the model.
BARBECUE Burner Control:
Controls
the flame on the barbecue burner. The
barbecue burner also serves as an ignition
burner to light the main burners when
following the manual lighting procedure.
All Hybrid Fire Grills have just one
barbecue burner.
Rotisserie Burner Control(s):
Controls the
flame on the rotisserie burner(s). Hybrid
Fire Grills have one or two rotisserie
burners depending upon the model.
Cooktop Burner Controls: Controls the
flame on the cooktop burner. HS model
Hybrid Fire Grills have two cooktop
burners.
Rotisserie Motor On/Off Switch:
Activates the rotisserie motor. Requires
grill to be plugged into an outdoor GFI
outlet (120V).
OFF POSITION
‘0’ indicates the valve is in
the fully closed position.
See “Lighting Your Grill”
on page 41.
HIGH/START POSITION
‘1’ indicates the valve is
in the fully open position.
Push in on the knob to
turn it counter-clockwise
from the OFF position to
HIGH/START.
LOW POSITION
Without pushing in on
the knob, turn counter
clockwise for the range of
burner control between
HIGH and LOW.
FIGURE 15 FIGURE 16
1. Read instructions before lighting.
2. Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off,
wait 5 minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the ignition burner control off, wait 5 minutes,
and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH
position. The main burner will light from the ignition burner. If ignition
does not occur within 5 seconds, turn the main burner controls off, wait
5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the rotisserie burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Remove the burner cover before operation.
Press in the cooktop burner control and turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the cooktop burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2. Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off,
wait 5 minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the ignition burner control off, wait 5 minutes,
and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH
position. The main burner will light from the ignition burner. If ignition
does not occur within 5 seconds, turn the main burner controls off, wait
5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the rotisserie burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Remove the burner cover before operation.
Press in the cooktop burner control and turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the cooktop burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2.
Open lid during lighting.
3.
If ignition does not occur in 5 seconds, turn the burner control(s) off,
wait 5 minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the ignition burner control off, wait 5 minutes,
and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH
position. The main burner will light from the ignition burner. If ignition
does not occur within 5 seconds, turn the main burner controls off, wait
5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the rotisserie burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Remove the burner cover before operation.
Press in the cooktop burner control and turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the cooktop burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
1. Read instructions before lighting.
2. Open lid during lighting.
3. If ignition does not occur in 5 seconds, turn the burner control(s) off,
wait 5 minutes, and repeat the lighting procedure.
Key to Burner Control Labels
CAUTION
Ignition Burner Main Burner Rotisserie Burner
Lighting Instructions
Main Burners
To light the main burners, you must first light the ignition burner.
Press in the ignition burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the ignition burner control off, wait 5 minutes,
and repeat the lighting procedure.
Once the ignition burner is lit, turn on any main burner to the HIGH
position. The main burner will light from the ignition burner. If ignition
does not occur within 5 seconds, turn the main burner controls off, wait
5 minutes, and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Rotisserie Burner(s)
Press in the rotisserie burner control and hold for 1 second.
While continuing to press in the control, turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the rotisserie burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burners
Remove the burner cover before operation.
Press in the cooktop burner control and turn to the HIGH position.
Continue pressing in until the burner lights. If ignition does not occur
within 5 seconds, turn the cooktop burner control off, wait 5 minutes,
and repeat the lighting procedure.
See your Use and Care Guide for manual lighting instructions.
Cooktop Burner
An Important Note About LP Cylinders
Kalamazoo strongly recommends connecting our grills to a bulk fuel supply (either bulk liquid
propane or a natural gas connection). The BTU rating of our high performance equipment
means that a standard 20-pound liquid propane cylinder cannot supply enough gas. Gas
appliance design and safety standards do not allow us to configure these grills to operate off
dual cylinders or to supply customers with a cylinder larger than 30 pounds.
We provide a 30-pound cylinder for those customers who cannot connect their grill to a bulk fuel supply.
In testing, a full cylinder effectively supplies a Kalamazoo grill with three primary burners on HIGH for
approximately 3 hours before the safety check valve causes the grill to stop operating.
What is a safety check valve?
Liquid propane cylinders feature a safety device intended to prevent gas from unintentionally flowing from the
cylinder. The device senses the pressure differential related to the flow of gas from the cylinder.
Why does the safety check valve shut down the grill?
When liquid propane is converted from a liquid in the cylinder to a gas to supply the grill, heat is required
for the change. This heat is drawn from the cylinder itself. The more BTUs needed by a grill, the more heat
needed. A 100 pound liquid propane cylinder can easily handle this exchange because of the increased
surface area. A 20 pound liquid propane cylinder cannot. The smaller cylinder will ice over. When it ices over,
the pressure inside the cylinder drops. If the internal pressure in the cylinder drops too far, the safety check
valve detects a small enough pressure differential in the gas flow that it will activate. The activated safety check
valve reduces the gas flow so greatly that it effectively turns off the grill.
What can I do if I have to run off liquid propane cylinders?
Keep a spare, filled cylinder available. When the cylinder in use ices over and the safety check valve kicks in,
switch to the other cylinder to continue cooking.
Where can I get the 30-pound cylinder refilled?
Most equipment rental and many party rental businesses will refill LP cylinders.
WARNING: Even though a safety check valve has been activated, gas is still flowing
through the system. If the burners have extinguished, immediately turn off the LP
cylinder at the master valve on the cylinder. Next, turn off all grill control valves.
Disconnect the regulator from the LP cylinder, then reconnect it. The safety check
valve should now be reset. However, if the cylinder is iced over, it is likely the safety
check valve will soon be triggered again.
Grill Controls
Each grill control knob corresponds to an individual burner control. The symbol to the right
of the knob indicates which type of burner and the burner position that knob controls. The
electronic ignition system works with one burner at a time. Activate the electronic ignition
point by pressing inward on the control knob.
Control Bezel Lights
ƒ A flashing white light indicates the hot surface
ignition is active and the valve stem is pressed
inward. The flash interval timing is one second to
aid in following the proper lighting procedure as
described on page 41.
ƒ A flashing blue light indicates the valve stem is
pressed inward, but the ignition system has timed
out and turned off.
ƒ
A steady orange glow indicates the system senses
heat at the burner. Please note this can be triggered
by a charcoal or wood fire even if the burner is OFF.
ƒ
A steady blue glow is shown when the system is
booting up after being connected to power.