Kalamazoo K500HB-2-NA, Use And Care Manual

Page: 17 / 64

+1.800.868.1699 29 KalamazooGourmet.com 28
Initial Assembly
Your Hybrid Fire Grill does not require any major assembly, but some pieces
are wrapped individually to prevent shipping damage.
FIGURE 6
A.
If not already attached, secure the gas hose to
brass supply fitting on the grill. The gas hose
connection is a flare fitting. No sealant is required.
Tighten with a wrench and check for leaks before
use.
For HS model grills (shown), the connection is
inside the side cabinet. (See Figure 3)
For HB and HT model grills, the connection is
underneath the floor pan. (See Figure 4)
B.
Place the warming rack above the rotisserie
burner(s). The end with the dog leg bend should
be toward the front right side of the grill.
C.
See page 32 for rotisserie rod installation
instructions.
D.
Place the primary cooking grates in the grill.
E.
Insert the Hybrid Fire Grilling Drawer.
F. Mount the CONTROL KNOBS onto the valve
stems.
G.
Place the ash bin in the cabinet, seated between
the posts mounted in the floor.
WARNING:
Never touch or empty the ash bin
when the grill is hot. Always wait at least 24 hours
before emptying the ash bin.
A
B
C
D
E
F
G
H.
Place the LP cylinder (HS LP-CYL models only) in the side
cabinet and secure with the straps.
I.
Place the cooktop burner diffusion caps on the cooktop
burners.
J. Mount the cooktop CONTROL KNOBS onto the valve
stems.
K. Place the cooktop burner grid on the cooktop burner
tray.
L.
Place the cooktop cover over the cooktop.
WARNING: Never place the cooktop
cover over the cooktop when one or
both of the burners are active/lit.
H
I
J
K
L