Kaiser La Perle AT 9343, User Manual

Page: 12 / 64

12
EN
INSTALLATION
INSTRUCTIONS
ELECTRICAL CONNECTION
Before connecting to the mains
power supply, make sure that the
mains supply has an efficient
ground connection complying with
all applicable laws and regulations.
Correct grounding is a legal
requirement. If the appliance is not
pre-fitted with a power cable and/or
plug, use only suitable cables and
plugs capable of handling the power
specified on the appliance's data
plate and capable of resisting heat.
The power cable should never reach
a temperature 50 °C above ambient
temperature at any point along its
length.
If the appliance is to be connected
directly to mains terminals, fit a
switch with minimum aperture of 3
mm between the contacts. Make
sure that the switch is of sufficient
capacity for the power specified on
the appliance's data plate, and
compliant with applicable
regulations. The switch must not
break the yellow-green earth wire.
The socket or switch must be easily
reachable with the oven fully
installed.
After connecting the device to the
power supply network (in
accordance with the requirements
defined above) it is necessary to
check the lighting of the hood and
whether its motor works correctly.
Attention! Installation and
electrical connection must be
made by a qualified expert
only.
Attention! The manufacturer
declines all responsibility for
damage or injury if the above
instructions and normal safety
precautions are not
respected.