58
GB
According to the chosen mode, the oven will
automatically establish the recommended
temperature and on the display appears a text
„
Oven … °C
“. After installation of the necessary
temperature of coocking on the display will be
lighted „
Thermoprobe:.. 00°C
“ for installation of
desirable temperature inside of a dish.
•
Press
keys
1
or
2
(
-
or
+
) to set the
temperature.
In 3 seconds the established parameters will be
remembered and an oven will be switched off.
If everything installed correctly, on the display
should be displayed:
- actual temperature inside of a dish,
- the established temperature inside of the dish,
- the established temperature inside of the oven.
After the end of the coocking the oven beeps.
•
Press
keys
1
or
2
(
-
or
+
) to silence a
buzzer.
If it is necessary to continue the coocking press
the key
2
.
3
1
2
Important!
While on the display flash an
inscription “
Thermoprobe: 00°C
”, the
oven waits for introduction of parameters!
Important!
At continue the coocking it is
necessary to establish anew temperature
inside of a dish.
Important!
Take out thermoprobe carefully
to prevent a burn.
