48
EN
Lighting
The lighting system consists of halogen lamps or
LEDs.
Replacement
•
Using a flat tool or screwdriver prise the
frame of the halogen lamp or LED
1
and
holding it, remove to the outside.
•
Replace the halogen lamp or LED
2
using a
piece of cloth or paper for that purpose.
•
Then reinstall the frame and the glass
proceeding in reverse order.
Cleaning
The following shall be avoided during normal
cleaning of the hood:
•
Wet cloth or sponge and water jet.
•
Solvents or alcohols which might dull
lacquered surfaces.
•
Caustic agents, particularly in regard to
cleaning stainless steel elements.
•
Hard, rough cloth.
It is recommended to us moist cloth and neutral
cleaning agents.
Important!
Make sure that you do not touch
the halogen bulb to be installed with your
bare fingers use for that purpose a piece of
cloth or paper!