14
EN
INSTALLATION
Installation of the wall hanger
•
Trace a vertical line on the wall to indicate
the centre of the cooker plate.
•
Place the hood body
1
on the wall to get
min 650 mm from the cooker plate. Level it
horizontally. Use the top of the rear side of
the hood as ruler to trace the line.
•
Hold a hood hanger profile
2
to the wall on
the horizontally, symmetrically to the
central line, mark the mounting holes on
the wall.
•
Drill the holes as indicated on the wall,
using drills of diameter 8 mm, drive the
plugs in and then screw the hanger profile
to the wall. The hooks should be upward
oriented.
Installation of the hood
•
Hang the hood body
1
on the installed
hanger
2
.
•
If the cooker hood will be use in extractor
mode it is necessary to mount a vent
conduit of Ø 150 mm on the fixed V-flap
3
.
By connection of a conduit of Ø 120 mm
use an adapter
4
.
•
If the cooker hood will be operate in odour
absorber mode it is necessary to install
charcoal filter.
•
Attach the telescopic column
6
on the
masking cover
5
of the mounted hood
1
.
•
Pull out the masking cover
6
on the
demanded height. Mark the level of the
mounting holes. Remove the masking
cover.
•
Place the hanger of the top masking cover
7
at the level of mounting holes and install
the hanger.
•
Hang the masking cover column
6
to the
hood’s body and to the wall hanger using
appropriate screws
