SAFETY PRECAUTIONS
01 - ENG
Before using your KB camera please ensure you
read and understand the following product and
safety precautions.
●
DO NOT use the camera in water without
the waterproof case.
●
Always check the waterproof case seal is
clean and free of debris prior to use in water.
●
DO NOT attempt to open the camera or
modify it in any way. If the camera has
been opened the warranty will be void.
Maintenance and repairs should only be
performed by Kaiser Baas.
●
DO NOT handle or charge the camera
without its waterproof case using wet hands.
Failure to observe this may result in damage
to camera and persons.
●
ONLY recharge the camera battery using the
supplied USB cable.
●
If using a wall charger, ensure that it is a
certified product for your region. AC Input:
100-240VAC 50/60Hz. DC Output: 5V 1A.
Only use a USB wall charger with suitable
approval and certification. Do not charge in
conditions outside of the 10°C - 45°C range.
If you do not know the voltage and current
of your charger, use the included cable to
charge from your computer.
●
The camera should not be used in heat
exceeding 55°C (131°F).
●
DO NOT drop, crush, pierce, bend, deform,
microwave, incinerate or shoot the camera.
PRODUCT DIAGRAM
02 - ENG
1. WIFI
ENABLE / DISABLE WIFI
2. Micro SD Port
CONNECT TO YOUR PHONE
3. Micro USB
CHARGING AND
DATA TRANSFER
4. Micro HDMI
CONNECT TO YOUR SCREEN
5. Power / Mode
POWER: HOLD 2 SECONDS
MODE: CLICK 1 SECOND
6. Record / OK
START / STOP RECORD
2
3
1
4
5
6
