17
18
Playback
Battery Guide
Maintenance
You can playback your footage on a PC
or computer/laptop.
Using the supplied USB cable, connect
the camera to your computer. Turn the
camera on, then the camera will now
appear as an external device.
You may also use a MicroSD Card reader
to view and playback files directly without
the camera.
HDTV Playback
To playback on HDTV you will need
a Micro HDMI – HDMI Cable.
When connected, the HDTV will switch
the Camera LCD screen OFF and mirror
the camera screen instead.
The camera will only output up to
1920x1080i via the Micro HDMI port.
Only use Kaiser Baas official batteries with
this product. Never use any third party
or unknown accessories or batteries.
To charge the camera:
1.
Insert the battery into the camera.
2.
Connect the USB Charging Cable to
the Micro USB port located on the
camera.
3.
Connect the USB Charging Cable
to a computer or wall charger.
Adhere to these guidelines to ensure
maximum performance and longevity.
• Never use the camera in water without
the waterproof case. The camera is not
waterproof without the case.
• If camera has been used in salt water,
ALWAYS rinse the waterproof case in
fresh water to prevent corrosion.
• Regularly check the seals for debris or
dust on the door of the waterproof case
to prevent water, sand and dirt ingress.
• Never handle the camera, battery or
MicroSD Card with wet hands or in wet
conditions.
• Clean the camera lens and waterproof
case lens with a soft micro fibre towel
to reduce any blurry footage due to
grease/fingerprints.
4.
The camera status LED will be RED
whilst charging. Once charging is
complete the status LED light will
switch OFF.
5.
A full charge cycle will take
approximately 3 hours by 0.5A/1A
charger.
WARNING!: If using a wall charger,
ensure that it is a certified product
for your region. AC Input: 100-240VAC
50/60Hz. DC Output: 5VDC 0.5A/1A.
Only use a USB charger with suitable
approval and certification. If you do not
know the output voltage/current of the
charger use a computer to charge the
battery. Do not charge in conditions
outside of the 10°C - 45°C range.
