55
EN
Installation and disassembly of heat
Install heat discharge pipe
1. Rotate joint A and joint B clockwise into the two
ends of heat discharge pipe.
clockwise
clockwise
joint A
joint B
heat discharge pipe
2. Insert joint A of heat discharge pipe (the side with "TOP" is upwards) into the groove until
you hear a sound.
clasp
locating pole
opening
joint B
correct
correct
correct
wrong
joint C
groove
the side with "TOP" is upwards
3. Aim the locating pole of joint B of heat
discharge pipe at the opening of joint
C; rotate it slightly to make joint B
and joint C connect tightly.
tightened
status
In order to improve cooling efficiency, the heat discharge pipe should be as short as possible
and flat without curve to ensure smooth heat discharge.
discharge pipe
