36
EN
Operation introduction for control panel
Name of control panel
Operation of control panel
temperature adjustment button
dual-8 nixie tube
cool mode indicator
signal receiving window
dry mode indicator
fan speed indicator
fan speed button
ON/OFF button
fan mode indicator
mode button
Note:
● After putting through the power, the air condi
t
ioner will give out a sound. After that, you
can operate the air conditioner by the control
panel.
● Under ON status, after each pressing of the button on control panel, the air conditioner
will give out a sound. Meanwhile, correspon
d
ing indicator on control panel will be bright.
● Under OFF status, dual-8 nixie tube on con
trol panel won’t display.
Under ON status, dual-8 nixie tube on control
panel will display set temperature under
cooling mode, while it won’t display under o
t
h
er modes.
Press this button can turn on or turn off the air conditioner.
Under cooling mode, press “+” or “-” button to increase or decr
ease set temperature 1ºC(º
F
).
Set temperature is range is 16ºC(61º
F
)~30ºC(86º
F
). Under auto, drying or fan mode, this
button is invalid.
Press this button and the mode will circulate acc
ording to below sequence:
Press this button and the fan speed will circul
a
te as “low speed→ medium speed →
high speed→ auto fan→ low speed”.
Note:
This button is invalid under DRY mod
e.
COOL→DRY→FAN
COOL: Under this mode, cooling mode indicator is bright. Corres
ponding fan speed indicator
is also bright. Dual-8 nixie tube displa
ys set temperature. Temperature setting range
DRY: Under this mode, drying mode indicator is bright. Low speed indicator is also bright.
Fan speed can’t be adjusted. Dual-8 nixi
e tube won’t be display.
FAN: Under this mode, the air conditioner only
blow fan. Fan indicator and corresponding
fan speed indicator are bright. Dual-8 nix
ie tube won’t be display.
Note:
Before turning on COOL or DRY mode, you must install the heat-removal pipe at first.
It’s unnecessary to install heat-removal
pipe un
der only FAN mode.
is 16ºC~30ºC.
1
ON/OFF button
2
“+”, “-” button
3
MODE button
4
FAN SPEED button
Buttons on remote controller
Introduction for icons on display screen
2
3
5
7
6
4
3
1
ON/OFF button
2
3
1
5
6
4
MODE button
+/-
button
FAN button
SWING button
SLEEP button
7
TIMER button
AUTO OPERATION
COOL OPERATION
DRY OPERATION
FAN OPERATION
HEAT OPERATION
TIMER ON TIMER OFF
SIGNAL-SENDING
SWING OPERATION
SLEEP OPERATION
LOCK
SET SPEED
SET TEMPERATURE SET TIME
Note:
This remote controller is the universal remote controller. Some function is not
available for this unit.